Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 27.06.2025 17:46

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

The third is lightning and “how it gets conducted into a home.”

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

ESPN announces TV start times, windows for 2025 SEC football season - Southeastern Conference

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

This is where this question deviates from being a 'generic' question, and becomes more specific.

Because the load is inductive, the current lags the voltage.(by a bit).

What is the recommended approach for creating a film or TV script? Should the script be written first or should the story be developed first? Why?

eight

It seems Mohan does not understand the difference between a comment and an Answer.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

This supermassive black hole is eating way too quickly — and 'burping' at near-light speeds - Space

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

In schematic diagrams this is the symbol for a fuse:

Japan's 10,000-Year-Old Underwater 'Pyramid' Is Still One of the World’s Biggest Unsolved Mysteries—No One Knows Who Built It - The Daily Galaxy

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

[image of Common-mode choke]

What is lightning?

Resilience spacecraft’s status after moon-landing attempt is unknown - CNN

(Dc diagram shown, AC is similar).

There are three different concepts here that are getting confused.

nine

Redefining physics to roll a ball vertically - Phys.org

I post the exact comment here.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

How do you raise well-behaved children?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

One

[old diagram got deleted by accident]

Bonnie Blue Permanently Banned From OnlyFans Over 'Extreme' Content - okmagazine.com

but this device (an Inductor) … impedes the rapid changes in the current.

A circuit breaker is similar, but is resettable.

He then asserts :

20M Eggs Recalled Amid Salmonella Outbreak - Newser

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

An AC voltage/ current source, and an ac inductive load.

Now when you have a certain ac resistance, then a current flows in a loop.

Zelenskyy says Russian drivers 'didn't know anything' about role in audacious drone attack - ABC News

a photo is worth a thousand words.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

so, what happens?

Physicists set new world record for qubit operation accuracy - Phys.org

At one ohm, the resistor has a maximum of 1 watt power.

Here is a simplified AC power diagram.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Tom Girardi Sentenced to 7 Years in Prison on His 86th Birthday - Vulture

but I think this circuit , shows a few more pieces.

Upvotes:

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Is China’s Tiandu-1 first to enter resonant Earth-moon orbit? US raises doubts - South China Morning Post

Can the fuse protect the electronic devices from lightning instead of a surge protector.

These devices are installed between the “hot” and “neutral” and protective ground.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

At least they know the answer if they wanted it.

So, the voltage could go up to 500 volts, and the fuse will not open up.

But it can get overloaded, and no longer works.

A fuse is a non-resetable over current circuit protector.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

These are simplified answers to the original question, and does not change anything I wrote above.

He then describes Rainy Season and Lightning.

2024–10–10[John johnson John Johnson ]

What does a fuse do?

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

First Sentence:

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

This is where the MOV conducts again, and dissipated the energy.

This device then solves the entire problem.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

For this case there are devices called Metal oxide varistors (MOV).

the problem then depends on "how fast does the fuse operate?".

One is “what exactly is in a ‘surge protector’ ? ”

2024–10–14 [Omar Gharbi Omar Gharbi ]

But… the neutral is now “floating” because of the 1 ohm resistance.

Edit 2024–10.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

He then describes the function of a fuse.

This one hit behind the barn.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

The bolt then partially travels down the line to your home.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

It also is a device that limits the change in current flow.

There are two important concepts here.

2024–10–16 [ OO OLAOYE OYEBODE ]

The other is “what does a “fuse” do?”

This is 'the assistant's answer'

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

Barnstars:

what exactly is a ‘surge’ protector?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

This is the picture of an electronic coil of wire wound around a core of magnetic material.